Subscribe to Our Youtube Channel
Related Manuals for Altinex SW1956CT
Summary of Contents for Altinex SW1956CT
- Page 1 SWITCHER MANUAL PART NUMBER: 400-0378-004 SW1956CT 2–IN, 1–OUT TWISTED PAIR AUTO-SWITCHER USER’S GUIDE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS PRECAUTIONS / SAFETY WARNINGS... 2 GENERAL...2 INSTALLATION...2 CLEANING...2 FCC NOTICE ...2 ABOUT YOUR SW1956CT ... 3 TECHNICAL SPECIFICATIONS... 3 PRODUCT DESCRIPTION ... 5 APPLICATION DIAGRAMS... 6 DIAGRAM 1: TYPICAL SETUP ...6 DIAGRAM 2: INTERNAL VIEW ...7 INSTALLING YOUR SW1956CT... 8 OPERATION ... -
Page 3: Precautions / Safety Warnings
Handle the SW1956CT carefully. Dropping or jarring can damage internal components. Do not place heavy objects on top of the SW1956CT. If the unit is to be mounted to a table or wall, use only ALTINEX-made mounting accessories. To turn off the main power, be sure to remove the cord from the power outlet. -
Page 4: About Your Sw1956Ct
ABOUT YOUR SW1956CT SW1956CT 2-In, 1 Out Twisted Pair Auto-Switcher The SW1956CT is a 2-In, 1-Out Twisted Pair Auto-Switcher. SW1956CT automatically upon signal detection, but may also controlled manually. designed switch ALTINEX transmitter and receiver signals. These include ALTINEX part numbers DA1930CT, DA1931CT, MT103-122, MT103-123, etc. - Page 5 Finish Height Width Depth Weight Ship Weight T Operating T Maximum Humidity MTBF (calculations) Table 2. SW1956CT Mechanical 400-0378-004 SW1956CT ELECTRICAL 0.100 in Al Input Signal Gray Analog Signal 3.000 in ( 76 mm) Output Video Signals 4.380 in (111 mm) Analog Signal 1.000 in ( 25mm)
-
Page 6: Product Description
SWITCHER PRODUCT DESCRIPTION 400-0378-004... -
Page 7: Application Diagrams
APPLICATION DIAGRAMS DIAGRAM 1: TYPICAL SETUP ALTINEX includes a remote control switch with the SW1956CT. The remote switch has a 6 ft cable and may used to control the switcher manually. When the remote control switch is connected to the INPUT SELECT jack, INPUT 1 will be selected if the channel select contact is closed. -
Page 8: Diagram 2: Internal View
DIAGRAM 2: INTERNAL VIEW CONTACT CLOUSURE TWISTED INPUT1 PAIR INPUT2 RJ-45 2.5 mm 9 VDC, 500 mA 400-0378-004 SIGNAL DETECT INPUT1 INPUT2 POWER SUPPLY SWITCHER OUTPUT TWISTED PAIR RJ-45... -
Page 9: Installing Your Sw1956Ct
400-0378-004 OPERATION There are no settings to adjust on the SW1956CT Auto-Switcher. successfully as long as cables are attached properly and other technical specifications are followed. -
Page 10: Troubleshooting Guide
POWER LED is still off, see Cause 2. Cause 2: The wrong power adapter is installed. Solution 1: Please use the ALTINEX supplied external adapter (9 V, 500 mA). If the POWER LED is still not on, please call (714) 990-2300. -
Page 11: Altinex Policies
Solution 3: Bypass the switcher and connect the output of the transmitter directly to the input of the receiver. If the display is good, then call ALTINEX at (714) 990-2300. If there is still no display, see Cause 4. Cause 4: Cable connections are incorrect.
Need help?
Do you have a question about the SW1956CT and is the answer not in the manual?
Questions and answers