Table of Contents
Advertisement
ASSEMBLY
HOW TO SET UP YOUR TRACTOR
CONNECT
BATTERY
(See Figs. 2 and 3)
CAUTION:
Do not short battery termi-
nals.
Before
connecting
battery,
red
_
ove
metal
bracelets,
wristwatch
bands, rings, etc.
Positive termina_ must be connected
first to prevent sparking
from acciden-
tal grounding.
Remove cardboard packing from seat pan and lift seat
pan to raised position.
o
Open battery box door.
Remove terminal protective caps and discard.
o
If this batter,/is
put into service after month and year
indicated on label (label located between terminals)
charge batter/for
minimum of one hour at 6-t0 amps.
First connect RED battery cable to positive (+) terminal
with hex bolt, flat washer, lock washer and hex nut as
shown. Tighten securely.
o
Connect BLACK grounding cable to negative (-) termi-
nal with remaining hex bolt, flat washer, lock washer
and hex nut. Tighten securely.
o
CIose battery box door.
Open battery box door for:
Inspection for secure connections
(to tighten hard-
ware).
-
Inspection for corrosion.
•
Testing battery.
Jumping (if required).
°
Periodic charging.
DISCARD
TERMINAL
PROTECTIVE
CAPS
HEX
NUT
LOCK
WASHER
FLAT
WASHER
/
F_G, 2
BOLT
NEGATIVE
(BLACK}
CABLE
POSITIVE
(RED) CABLE
SEAT
PAN
BOX DOOR
FIG. 3
aNSTALL
SEAT (See Fig° 4)
Adjust seat before tightening adjustment bolt.
o
Remove cardboard packing on seat pan.
o
Place seat on seat pan and assemble shoulder bolt.
•
Assemble adjustment bolt, lock washer and fiat washer
loosely.
Do not tighten.
o
Tighten shoulder bolt securely.
Lower seat into operating position and sit on seat.
o
Slide seat until a comfortable position is reached which
allows you to press clutch/brake
pedal all the way
down.
Get off seat without moving its adjusted position,
°
Raise seat and tighten adjustment bolt securely.
SEAT PAN
SHOULDER
X\
BOLT
SEAT
\
ADJUSTMENT
BOLT
FLAT WASHER
LOCK WASHER
F_G. 4
8
Advertisement
Table of Contents
