Filters; Dust Bag; Brushroll; Brush Roll Belt - Eureka 2900 Series Owner's Manual

PROBLEM SOLVING

NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
Motor will not start.
Motor suddenly stops.
Does not clean the carpet or floor.
No suction at the end of hose.
Headlight not working.
Noise from the brush roll area.
Cleaner is hard to push.
Cleaner height knob will not turn
Questions?
CAUSE
Electric Plug
Thermal Cut Off

Filters

Dust Bag

Hose
Belt

Brushroll

Hose Adapter
Filters
Hose
Dust bag
Light Bulb
Brush Roll
Belt
Cleaner Height Setting
Belt
Cleaner Height Setting
www.eureka.com
SOLUTION
q Push plug securely into outlet.
q Try another outlet.
q Check circuit breaker.
q Page 2.
q Clean or replace the filters. Hint: If picking up
fine dust, the filters may not look dirty but a
fine substance tends to reduce suction when it
blocks the airflow through the filter(s). Page 5.
q Replace the dust bag with a new dust bag.
Page 6.
q Be sure the dust bag is properly seated into the
cleaner body. Page 6.
q Be sure hose adapter is secure on back of
cleaner. Page 8.
q Remove any blockages from the hose that
restricts the airflow. Page 8.
q Check to see that the end of the hose is firmly
pressed into the hose retainer in the hood of
the vacuum.
q Check base hose and long hose. Page 8.
q Replace a broken, cut, loose or out of shape
belt.
q Clean hair and thread from bristles and end
cap area. Replace brush roll if bristles are worn.
q Be sure hose adapter is secure. Page 8.
q Clean or replace the filters. Hint: If picking up
fine dust, the filters may not look dirty, but a
fine substance tends to reduce suction when it
blocks the airflow through the filters.
q Remove any clogs from the hose that restricts
the airflow. Check base hose and long hose.
Page 8.
q Change dust bag.
q Replace light bulb. Page 7.
q Remove hood and clean debris or items from
the brush roll area.
q Replace a broken, cut, loose or out of shape
belt. Page 6.
q Put handle in operating position. Tilt the cleaner
back to raise the front wheels off floor. Then turn
the knob to a higher setting.
q Replace a broken, cut, loose or out of shape
belt. Page 6.
q Hint: Put handle in operating position. Tilt the
cleaner back to raise the front wheels off floor.
Then turn the knob.
Call 1-800-282-2886 between 8 a.m. to 7:30
p.m., (CST), Monday - Friday and 10 a.m. to
6:30 p.m. (CST) Saturday and Sunday. Know
the model and serial numbers when you call.
9