How To Use - Eureka 2900 Series Owner's Manual

How To Assemble
4
(continued)
7
Pull the electrical
cord up to the cord
retainer and firmly
push down
retainer. This
keep the cord out of
the way the next time
you vacuum.
8
Wind the
around the two cord
hooks on the back of
the vacuum.
9
Secure plug to the
cord to prevent
unwinding.
10
Store the wands
on the side of the
vacuum in front of
the hose.
11
Store the dusting
brush.
1-800-282-2886

How To Use

WARNING: Avoid injury. Keep loose clothing,
hair,fingers, and all other parts of
body away from any moving part (such
as the revolving brush). Turn off the
into
switch andunplug the cleaner before
will
changing the cleaner height setting.
ON/OFF Switch.
International symbol I
cord
means On, International
symbol O means Off.
Cleaner Height Setting.
lowers the cleaner base to match the type of floor surface.
With the cleaner cord unplugged, set the adjustment to
lowest setting for maximum carpet cleaning. If the cleaner
is difficult to push, move adjustment to next highest
setting until cleaner is comfortable to push. The brush
roll must reach the carpet for effective cleaning. For ease
in moving the adjustment knob, place handle in operating
position.
Helpful Information:
Listen to your cleaner. If you notice a change in the
sound of the motor or a change in performance, it could
simply indicate a common usage or maintenance
issue. Such as, a need to raise or lower the carpet
height adjustment, possible blockage in hose or brush
roll area, or a broken or loose brush roll belt. These
are all easy to fix and the instructions are included in
this owner's guide. Becoming familiar with the
information in this guide will help you to get the best
possible performance from your new cleaner for many
years to come.
Handle Release.
Step
on handle release to pull
handle back to a comfortable
operating position.
lower handle completely to
the floor, depress handle
release a second time.
Helpful Information:
Before cleaning under
low furniture, check area
first for objects that might
harm the unit or block the
vacuum hose.
An adjustment that raises or
To