3.3.2
Separator
(1) Turn the power switch off "O" and remove the connector cord.
(2) Disengage the link and paper feeder cover (see 3.3.1).
(3) Remove the 2 screws 1, disengage the locks at 2 locations on the upper frame 2 with a
screwdriver, and remove the upper frame 2.
(4) Remove the 2 screws 3, and take out the separator assembly 4.
(5) Disengage the separator 7 from the separator bracket 6 while lifting the paper hold 5, and
take out the separator
(be careful not to lose the spring 8 when you are doing this).
Lock
3
1
E - 11
2
4
6
Lock
8
2
Screwdriver(-)
5
7