Frigidaire CGLES389FB3 Use & Care Manual page 11

Drop-in/slide-in models
Table of Contents

Advertisement

Models
with
Ceramic
Glass
Cooktop
(continued)
Operating
the Dua_ Surface
Radiant
E_ement
(Mode_s with Ceramic
G_ass Cooktop
On_y)
ModeUA is equipped with DuaUradiant surface ebments at
aH positions (See Figs, 5 & 6), ModeUs B, C, D & E are
equipped with a duaUradiant surface eUement bcated at the
right front (See Figs, 7 to 14) position, SymboUs on the
controU paneUare used to indicate which coil of the duaU
radiant eUement wHU heat, The 0 symboU indicates that onUy
the inner coil wHUheat (Figs, 1,3, 5, 7, 9, 11 & 13), The @
symbol indicates that both inner and outer coils will heat
(Figs, 2, 4, 6, 8, 10, 12 & 14), You may switch from either
coil setting at any time during cooking,
To Operate
the
Dua_ Surface
E_ement:
1,
Place correctly sized cookware on the dual surface
element,
2,
3,
4,
Push in and turn the control knob counterclockwise
(See Fig. 3) for smaller cookware or clockwise (See
Fig. 4) for larger cookware.
Turn the knob to adjust the setting if needed, Start
most cooking operations on a higher setting and then
turn to a lower setting to finish cooking, Each surface
element provides a constant amount of heat at each
setting, A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates the
cookware is too small for the surface heating area,
When cooking has completed, turn the surface control
knob to OFF before removing the cookware. Note: The
Surface Indicator light will come on when the control
knob will be turn on and will continue to glow until the
glass cooktop has cooled down to a moderate level.
The light may remain on even though the controls are
turned OFF.
Note: See page 9, Fig. 1 for recommended control settings.
Radiant surface elements may appear to
have cooled after they have been turned off, A hot surface
indicator light will come on and will continue to glow until
the glass cooktop has cooled down to a moderate level,
The gJass surface may stitt be hot and burns may occur
if the glass surface is touched before the indicator light
has turned off,
o
@
Small
Large
Element
Element
Fig, 1
Fig, 2
0 hi
hi _'
o hi
hi
2
2
Io
Fig, 3
Fig, 5 - Model A
o
Fig, 7 - Model B
o o
Fig, 9 - Model C
%%
Fig, 11 - Model D
o o
o
o
Fig, 6 - Model A
Fig, 8 - Model B
©
@oo
o
o
Fig, 10 ° Model C
11
Fig, 13 - Model E
Fig, 14 - Model E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents