Table of Contents
Advertisement
Available languages
Available languages
Self=Cleaning
Self-Clean
Time
Length
For satisfactory results, use a 2 hour Self-Cban cycle for light soils and a 3 hour cycle for average ora 4 hourcycb
for heavy
soils. NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the
Self-Cban cycle. This will help eliminate the normal odors associated with the Self-Cban cycle.
To Set the Controls
for a Self-Clean
Cycle or a Delayed
Start Self=Clean
Cycle:
(Note: if you do not want to start a Delayed Self-Cban Cycle, skips steps 2 & 3.)
1.
Be sure the clock shows the correct time of day.
Press _.
The " : " in the time of day will flash.
2.
3.
Press and hold the
) pad to scroll to the time to start the delayed Self-Cban cycle. Release the pad when the desired
time is displayed.
Press _.
"
"appears in the
4.
display.
5.
Press the
or 0
once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press
"2:00" appears in the display or to select a 4 hour cycle press
"4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the "DOOR LOCK" indicator
light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).
6.
"CLn" will appear in the display during the Self-Clean cycle and the "DOOR LOCK" light will glow until the Self-Cleaning
cycle is complete or cancelled and the oven temperature has cooled.
When the Self=Clean Cycle is Completed:
1.
The time of day or "End" will appear in the display window and the "Clean" and "DOOR LOCK" light will continue to glow.
2.
Oncetheovenhascooleddownforaboutl
HOURandthe"DOORLOCK"lighthasgoneout,
theovendoorcanbeopened.
3.
if "End" is in the display and the Select Clean indicator light remains ON, press i
The time of day will appear in the
display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping
or Interrupting
a Self-Cleaning
Cycle
if it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1.
Press,
}.
2.
Once the oven has cooled down for about 1 HOUR and the "DOOR LOCK" light has gone out, the oven door can be
opened.
3.
Restart the Self-Clean cycle once all conditions have been corrected.
_To
avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side
of the oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid
possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
Advertisement
Table of Contents
