Table of Contents
Advertisement
Available languages
Available languages
Setting Oven Controls
Note: The time of day must first be set in order to operate the 0venl
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "t 2:00".
t.
Press _
once (do not hold pad down).
2.
Within 5 seconds, press and hold the 4
t until the correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake or Self-Clean cycle.
To Set the MinuteTimer:
1.
Press _.
2.
Press the O
to increase the time in one minute increments. Press and hold the
to increase the time in 10 minute
increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If the O
pad is pressed first, the timer will advance to 11 hours and 59 minutes.
3.
The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in seconds.
4.
When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until
is pressed.
Note: The indicator light located above the _
pad will glow while the minute timer is active.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set
time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in
use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that
function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the
or O
to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out: Press _.
NOte: To turn the time Of day display OFFer ONin the display piess _
and hold f0r i 5 seconds (the C0nti0! will beep
once) and then release, This feature does not remove the set time of day from the memory of the contro!. When the display
is turned OFF the time 0f day will reappear for a few secondS a_Y time the@
pad is touched.
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius) or from °C to °F (control should
not be in a Bake or Clean mode):
t.
Press,
_. "
" appears in the display.
Press and hold the A
until "Hi" appears in the
2.
display.
3.
Press and hold
, until °F or °C appears in the display.
A
4.
Press the
orU
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
Advertisement
Table of Contents
