Table of Contents
Advertisement
Oven vent location
The oven vent is located under the left side of the
control panel (See Fig. 1). When the oven is on, warm
air passes through this vent. This venting is necessary for
proper air circulation in the oven and good baking results.
Do not block the oven vent.
oven vent
location
Removing,
replacing
& arranging
racks
To remove - pull the rack forward until it stops. Lift up
front of rack and slide out.
To replace - fit the rack onto the guides on the oven walls.
Tilt the front of the rack upward and slide the rack back into
place.
Arranging
- always arrange the oven racks when the oven
is cool (prior to operating the oven).
Fig. 1
Always use oven mitts when using the oven.
When
using the appliance, oven racks and cooktop will become
very hot which can cause burns.
The flat oven rack or flat handle oven rack (some
models) may be used for most cooking needs.
The half rack (some models) design comes with a
removable section that allows for taller cooking utensils.
The offset oven rack (some models) is designed to place
the base of the rack about 1/2 of a rack position lower than
normal. This rack design provides several additional
possible positions between the standard positions.
To maximize oven cooking space place the bottom oven
rack (some models) in the lowest rack position for baking
or roasting large cuts of meat.
Recommended
rack positions
Food type
Position
Broiling meats
Cookies, cakes, pies, biscuits & muffins
Frozen pies, angel food cake, yeast
bread, casseroles
Small cuts of meat or poultry
Turkey, roast or ham
See broil
4or5
2or3
lor2
1 or2
Only the Effortless TM Oven Rack should be used in
oven rack position 2. Placing any other rack in rack
position 2 will prevent the oven door from fully closing.
The Effortless TM Oven Rack (some models) is described
later in this section.
Advertisement
Table of Contents
