Frigidaire FPIF3093LFB Use & Care Manual page 15

Pan sensing-induction cooking zones (cont'd)
Minimum pan size
Each of the four induction cooking zones require a minimum
pan size in order to activate. The smaller inner ring
provided at each cooking zone location (See Fig. 1) is your
guide to the correct minimum pan size for that zone.The
cookware bottom must fully cover the minimum area for the
heating process to begin.
If a pan that is induction capable is centered properly but is
too small, the affected cooking zone display will flash the
last power level setting and the pan will not heat. Select a
larger pan that meets the minimum size requirement to
activate the cooking zone.
The illustration provided shows the minimum pan size
requirements for each cooking zone location.
Maximum recommended pan size
Use the cooktop graphics provided for each induction
cooking zone location to help determine the recommended
maximum cookware size.
It is recommended not to use pans with bottoms that
extend more than 1/2" (13mm) beyond any of the outer
cooking zone ring patterns provided on the cooktop.
The cookware bottom must make full contact with the
ceramic glass surface without the cookware resting on or
touching the metal sides, rear or front metal edges of the
cooktop.
_i_duction
Fig. 1 - Induction cooking zones minimum pan size requirements
Cookware or
pan bottoms
should not
m exceed
I/2"
(13mm) from
outer cooking
zone rings.