Frigidaire GL38CAEC Use & Care Manual page 7

SIDE BURNER PARTS ASSEMBLY
1. Attach the side burner shelf to the grill by inserting the
shelf hooks into the slots on the side of the grill and
pushing down on the shelf assembly until level with the
grill. (See Fig, 8)
2. Lock the side burner shelf in place by inserting (2) hex
head screws in the side burner. (See Fig. 9)
NOTE: A power screwdriver extension is needed to
insert screws.
3. Install burner and cap. (See Fig. 10-11)
4. Install grate over burner. (See Fig. 12)
5. Attach the three (3) wires coming out from the side of
the grill and the side burner wire to the igniter terminals.
(See Fig. 13-14)
NOTE: It does not matter which wire goes to which
terminal on the igniter.
Fig. 8
Fig. 9
Back of side burner.
Fig. 13
Fig. 10
Fig. 14
Fig. 11
Fig. 12