Instructions - Frigidaire 600 Series Use & Care Manual

Operating Instructions (continued)
Wash Cycle Selections
Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all models.
Cycle Chart
Cycle Description To Select Cycle Water Time* Washes/
(approx.) (approx.) Rinses
Pots & For pots, pans, • Turn dial to POTS & PANS/HEAVY 7.2 gal. 81 min. 2 washes
Pans casseroles, and WASH. 6.0 imp. gal. 4 rinses
dinnerware with dried- • Select HI-TEMP WASH ON option. 27.3 liters
on or baked-on soils. • Select other desired OPTIONS.
Heavy For heavily soiled • Turn dial to POTS & PANS/HEAVY 7.2 gal. 81 min. 2 washes
Wash dishes and silverware. WASH. 6.0 imp. gal. 4 rinses
• Select desired OPTIONS. 27.3 liters
Normal For regularly soiled • Turn dial to NORMAL WASH. 6.0 gal. 75 min. 2 washes
Wash dishes and silverware. • Select desired OPTIONS. 5.0 imp. gal. 3 rinses
22.7 liters
Short/ For lightly soiled or • Turn dial to SHORT/LIGHT WASH. 4.8 gal. 67min. 1 wash
Light 3re-rinsed dishes and • Select desired OPTIONS. 4.0 imp. gal. 3 rinses
silverware. 18.2 liters
Rinse/ For rinsing dishesthat • DO NOT USE detergent. 1.2 gal. 4 min. 1 rinse
Hold will be washed later. • Turn dial to RINSE/HOLD. 1.0 imp. gal.
4.5 liters
* Includes dry time.
Energy Options
Hi-Temp Wash Option
When HI-TEMP WASH ON option is selected,
the dishwasher heats the water in the main
wash to approximately 140°F (60°C). Wash
action will continue but timer will not advance
until proper temperature is reached. The hotter
water provided by this option helps activate
dishwasher detergent to clean food grease
and soil from dishes. HI-TEMP WASH ON
option can be used with any cycle except
RINSE/HOLD.
To turn off option, select HI-TEMP WASH OFE
Hi-Temp Rinse Option
When HI-TEMP RINSE ON option is selected,
the dishwasher heats the water in the final
rinse to approximately 140°F (60°C). This will
speed drying and reduce spotting. HI-TEMP
RINSE ON option can be used with any cycle
except RINSE/HOLD.
TO turn off option, select HI-TEMP RINSE
OFF.
Heat
Dry Option
HEAT DRY ON option provides faster drying
since the heating element is on during the
drying portion of cycle.
HEAT DRY OFF option saves electricity since
the heating element is off during the drying
5
portion of cycle. To speed drying process, open
the door slightly after the cycle is complete.
Some water droplets may remain on door and
tub and in areas where dishes touch silverware
basket and rack.
With either option, you may see water vapor
coming from vent during the washing and/or
drying portion of cycle. On some models, the
vent is closed during washing to hold moisture
and sound inside and then opens for drying.
The drying option may be changed at any time
during the cycle and affects only the drying
period.
Status Indicator Lights
(available on select models)
When DELAY START option is selected, the
Delay Start light will glow as timer counts
down to begin cycle.
The HEATING DELAY light means the cycle is
being extended to heat water to proper
temperature in the main wash or final rinse,
based on options selected.
CLEAN light comes on when a cycle is
complete. To turn it off, turn dial slightly until
light goes off.