Table of Contents
Advertisement
Operating
Instructions
TO CHANGE TEMPERATURE
SETTING;
temp/timer
1
auto
m hi
reed
lo
heat
[] cool
energy saver
/a, on&
DO THIS;
PRESS A TO RAISE
V TO LOWER
YOU
WILL SEE:
tamp/timer
auto
m hi
reed
lo
heat
[] cool
energy saver
/an only
Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature
is seen on the display. This temperature will
be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C) for cooling mode. The temperature
will be auto-
matically maintained anywhere between 55 °F (13 °C) and 80 °F (27 °C) for heating mode. If you want the display to read the
actual room temperature.
See "To Operate on Fan Only" section on this page.
TO ADJUST FAN SPEEDS;
YOU WILL SEE:
auto
[] hi
reed
[o
temp/timer
[] cool
energy saver
#n amy
DO THIS:
PRESS TO SELECT
auto
hi
reed
mto
heat
[] cOOl
energy saver
fan only
re•p/timer
TO USE AUTO FAN FEATURE=
tamp/timer
auto
hi
mad
mlo
[] cool
energy saver
fan omy
DO THIS;
PRESS FAN
BUTTON
SELECT AUTO
YOU
WILL SEE:
tamp/timer
[] auto
hi
mad
lo
heat
[] cool
energy saver
fan onty
Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature
dictates. For example, if the room doesn't
get too warm,
it will stay at the slowest
speed.
If the room temperature
rises quickly,
such as a door being opened,
it will auto-
matically
go to the highest
speed. The fan speeds
will re-adjust
back to the slowest
speed as the room returns
to the original
set
temperature.
Press either
the fan slower
or fan faster
button
to adjust
the fan speed manually.
This function
is deactivated
in the
heating
mode
on 115V models.
TO OPERATE ON FAN ONLY:
YOU WILL SEE;
tamp/timer
[] auto
hi
reed
lo
heat
[] cool
energy saver
Note: Use this function onl'
.______--------
DO THIS;
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
auto
[] hi
mad
lo
heat
cool
energy saver
[] #n only
tamp/timer
when cooling is not desired, such as for room air circulation or to exhaust stale air on some models.
Advertisement
Table of Contents
