Craftsman 113.23100 Owner's Manual page 6

ATTACH
ELEVATION CRANK,
Be sure setscrew is tightened on flat of shaft.
ELEVATE ARM TO ITS MAX_ HEIGHT,
Remove shipping btock,
ELEVATION
TURN CLOCKWIS_
REMOVE CARRIAGE STOP SCREW, LOCKWASHER
AND TAG. Read warning tag before discarding
INF O_MAI _0 N
TAG
_,_ LOC KWASH[_
/SlOP SCrEw
HE_( [ WRENCH
SUPPLIED
TIGHTEN ARM LOCK KNOB BEFORE PROCEEDING.
HOLDING CARRIAGE ASSEMBLY WITH BOTH
HANDS, CAREFULLY START AND SLIDE THE
CARRIAGE ONTO THE TRACKS. The assembly must be
held parallel with the arm so that all four bearings slide
smoothly onto the arm, preventing any excessive strain on
bearings and track°
WARNING: REINSTALL CARRIAGE STOP SCREW TO
PREVENT CARRIAGE FROM ROLLING OFF ARM,
Check for looseness of carriage bearings. Refer to Paragraph
8, Trouble Shooting Sectiom