Friedrich CP10 Installation & Operation Manual page 16

Electrical safety
Electrical Data
115V~
F
\=j
Power cord may include a current interrupter device.
A test and reset button is provided on the plug case.
The device should be tested on a periodic basis by first pressing
the TEST button and then the RESET button.
If the TEST button does not trip or if the RESET button will not
stay engaged, discontinue use of the air conditioner and contact
a qualified service technician.
Use Wall Receptacle
©
Standard 125V, 3-wire grounding
receptacle rated 15A, 125V AC
Power Supply
Use 15 AMR time
delay fuse or 15 AMR
circuit breaker.
Use of extension cords
Because of potential safety hazards, we strongly discourage the use of an extension cord.
However, if you wish to use an extension cord, use a CSA certified/UL-listed3-wire (grounding)
extension cord, rated 15A,125V.
All wiring should be made in accordance with local electrical codes and regulations.
I M[o_i[*]q
Aluminum house wiring may pose special problems. Consult a qualified electrician.
ELECTRICAL SAFETY
IMPORTTANT GROUNDING INSTRUCTIONS
Air conditioner has a three-prong grounding plug on its power supply cord, which must be
plugged into properly grounded three-prong wall receptacle for your protection against possible
shock hazard.