Table of Contents
Advertisement
Available languages
Available languages
Contents
of Carton
2-
Wheels
2 - Shoulder Bolts, 3/8-16
2 - Hex Nuts, 3/8-16
Tools Required
for Assembly
1 - 9/16" socket or open end wrench
1 - 1/2" socket or open end wrench
The wheels and
handle do not
provide adequate
clearance,
stability
or support
for pulling the
unit up and down stairs or steps.
The unit must be lifted or pushed
up a ramp.
It may be
necessary
to brace
or support
one end of the unit
when attaching
the wheels and
the rubber feet, because
the air
compressor
will have a tendency
to tip.
1.
Place shoulder bolt (C) through
wheel (B) and position it into the
hole of the mounting bracket
(protruding hub to the inside),
Thread nut (A) onto shoulder
bolt and tighten firmly with a
9/16"
wrench.
Repeat to install
second wheel.
2.
Attach the rubber feet (D) to the
bottom of the front bracket using
the screws (E) provided.
3.
Rotate handle into operating
position as shown.
NOTE: Handles will lock into
place.
D29704
IO-ENG
Advertisement
Table of Contents
