Table of Contents
Advertisement
SERVICE AND ADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS
e
Depress brake-clutch pedal and Set parking brake.
e
Place shift control lever in NEUTRAL position.
•
Place attachment clutch lever In DISENGAGED position.
e
Turn ign!tlon key OFF and remove key.
®
Make sure the blades and all movtng parts have completely stopped.
TRACTOR
TO REMOVE MOWER DECK
Remove mower dec=kfrom right side of tractor+,
e
Place cutting height adjustment lever in lowest cutting
position,,
e
Remove hairpin cotter from mower deck hitch and
remove deck hitch rod from front hole of the front mount-
ing bracket (see RG. 18),,
Lower deck hitch.
O
O
Turn front wheels all the way to the left to allow mower
deck hitch to slide past right front wheel,.
e
Remove hairpin cotter and flatwasher from hanger pin of
right rear lift arm and slide off right mower deck lift
bracket (see FIG. 19),
e
Remove hairpin cotter and flatwasher from hanger pin of
left rear lift arm and slide off left mower deck lift bracket
(see FIG, 19)+
•
Flex lower engine pulley belt guide away from puitey (see
FIG. 20),,
e
Move mower deck forward and remove mower deck drive
belt from lower engine pulley+ Reposition belt guide_
e
Remove hairpin cotter and ftatwasher from hanger pin on
mower clutch lever betcrank strap assembty.,
e
Disconnect
mower deck engagement
spring
from
belcrank strap assembly (see FIG. 21),
e
Place cutting height adjustment lever in highest cutting
position,+
e
Slide mower deck out from under right side ot tractor.
TO INSTALL MOWER DECK
e
Place cutting height adjustment lever in highestcutting
position, If cutting height is not in highest position, the
deck brackets will hit the lift arms white slidingthe deck
under the tractor.
e
Place mower
deck on right side of tractor with
chute deflector away from tractor..
e
Turn front wheels of tractor to maximum left turn,
•
Liftdeck hitchand slidedeck undertractor to a centered
position+
e
From left side of tractor, slide deck rearward_ Then con-
nect mower deck engagement spring to hanger pin on
the mower clutch lever beicrank strap assembly, and
reinstall flatwasher
and hairpin cotter on hanger pin
(see FIG. 21)+
!
MOUNTING
BRACKET
COTTER
ROD
_ECKHRCH
VIEW FROM FRONT OF TRACTOR
FIG. 18
MOWER DECK
HAF _._-,R
LIFT BRACKET
PIN
REAR LIFT ARM
(RIGHT SIDE)
(RIGHT SIDE)
FLATWASHER
VIEW FROM RIGHT SIDE OF TRACTOR
FIG. 19
LOWER ENGINE
PULLEY BELT GUIDE
FIG. 20
23
Advertisement
Table of Contents
