Advertisement
MAINTENANCE
MAINTENANCE
TABLE
PROCEDURE
FIRST
EACH
2
USE
HOURS
M
O
Blade, Inspect and Sharpen
w
................................................................
E
R
Battery, Clean
!ati
EVERY
EVERY
EVERY
EVERY
8
25
50
100
BEFORE
HOURS
HOURS
HOURS
HOURS
STORAGE
4
E
N
Oil, Change
4
_
Spark Plug, Replace
*
Change oil every 25 hours when operating under heavy load or in high temperatures.
**
Clean cooling system move often if operating under dusty conditions.
"i" If engine is not equipped with a Foam Air Filter, then service the Paper Air Filter every 25 hours.
4
GENERAL
RECOMMENDATIONS
1.
The owner's responsibility is to maintain this product. This wilt
extend the life of the product and is also necessary to maintain
warranty coverage.
2.
Check the spark plug, drive brake, lubricate the unit, and clean
the air filter once a year.
3.
Check the fasteners. Make sure all fasteners are tight.
4.
Follow the Maintenance and the Service And Adjustment sec-
tion to keep the unit in good operating condition.
WARNING:
Before you make an inspection,
adjust-
,_
ment, or repair to the unit, disconnect the wire to the
spark plug. Remove the wire from the spark plug to
prevent the engine from starting by accident.
Maintenance,
replacement, or repair of the emission control devices
and systems may be performed
by any non-road engine repair
establishment
or individual. Regular maintenance wilt improve the
performance and extend the life of the engine.
CHECK THE TIRES
Check the air pressure in the tires. Tires with too much air pressure
will cause the unit to ride rough. Also, the wrong air pressure will
keep the mower housing from cutting level. The correct air pressure
(PSI) is shown on the side of the tire.
F-050610L
21
Advertisement
