Advertisement
Available languages
Available languages
To Replace
Regulator
1.
Release alI air pressure from air
tank, See "To Drain Tank" in the
Maintenance
section.
2.
Unplug unit.
3.
Using an adjustable wrench
remove the outlet pressure gauge
and quick connect from the
regulator,
4.
Remove the regulator.
5.
Apply pipe sealant tape to the
nipple on the standpipe,
6.
Assemble the regulator and
orient as shown.
NOTE: Arrow indicates flow of
air. Make sure it is pointing in the
direction of air flow.
Reapply pipe sealant to outIet
pressure gauge and quick
connect.
Reassemble outtet pressure
gauge and quick connect. Orient
outlet pressure gauge to read
correctly. Tighten connect with
wrench.
17-ENG
A08595
Advertisement
