Craftsman Professional Series Chests and Roller Cabinets Operator's Manual page 3

MASTER LOCK ® ONE-KEY TM LOCK
Locking the unit
• Make sure drawers are fully closed.
• Insert the key and turn fully to the left.
• Return key to center position to remove key.
Unlocking the unit
• Insert the key and turn fully to the right.
• Return key to center position to remove key.
Rekeying
The MASTER LOCK ® ONE-KEY
TM
learning lock
system allows the chest and cabinet to be keyed
alike. The lock can also be keyed to Kwikset ®
style house keys.
• Insert current key and turn lock to the right
until access notch appears at top of lock.
• Depress and hold catch through access notch
using re-keying tool provided.
• Remove key.
• Insert new key.
• Release catch.
• Turn lock to center position.
• Remove key
Note: Catch must be depressed to insert or
remove key in right hand position. Catch may be
released between keys.
Access notch
/
J
With proper care, your tool storage unit will
give you a lifetime of service. Use the
recommended lubrication chart and care
instructions to maintain the investment you
have made. These units are rust protected
with a phosphate undercoat and covered
with a durable finish. The paint is
electrically adhered to the metal. With
proper care your unit wilt look attractive for
many years.
• Periodically the drawer fronts, drawer
trim, and other surfaces should be
cleaned with a mild detergent and water
to keep them looking new.
• Auto wax will preserve the storage unit's
high luster finish. Apply the wax as you
would to your car. The wax will help
protect the unit against scratches.
• Grease and oil can be removed with
most standard cleaning fluids. For
safety, use a nonflammable cleaning
fluid.
• We supply and recommend drawer liners
to protect the finish inside the drawers
and make them easier to clean. Drawer
liners may be cleaned with soap and
water.
\
Re-keying tool
5 6