Advertisement
ASSEMBLY
BEFORE
YOU START TO ASSEMBLE
THE GRASS
CATCHER
Some tracto r models may need minor modifications before you can mount the grass catcher to the tractor. Look carefully at the mower
deck on your tractor and compare the deck mandrel to the illustrations below.
If your mower deck mandrel looks like STYLE "A",
your tractor is ready - proceed with the grass catcher assembly.
If your mower deck mandrel looks like STYLE "B", go to the
PREPARATION
section in back of this manual.
DECK MANDREL
DECK MANDREL
STYLE
"A"
STYLE "B"
PARTS
IDENTIFICATION
COVER
UPPER CHUTE
FULL
BAGGER
INDICATOR
CHUTE
LATCH
G
CATCHER
CONTAINERS
LOWER
CHUTE
LOWER CHUTE
ATTACHING
WING NUT
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned
in this manual, it means when you are seated on the tractor,
in the operator's position.
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•
Depress clutch/brake pedal fully and set parking brake.
Place gearshift/motion
control lever in neutral (N) position,
Place attachment clutch in "DISENGAGED"
position.
Turn ignition key "OFF" and remove key.
•
Make sure the blade and all moving parts have completely stopped.
•
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
5
Advertisement
