Ovenracksupportsand Ovenvents - Electrolux EW30GS65GS3 Use & Care Manual

Feature Overview
SUPPORTS & ' NTS
m [] m [] I m m m m [] B [] [] [] m [] m Im m [] [] m
Installing Oven Rack Supports
ALWAYS INSTALL OVEN RACK
SUPPORT BEFORE TURNING ON
THE OVEN (WHEN THE OVEN tS
COOL).
To install oven rack support, insert
the supports by pushing them downward
into the two brackets on each side of the
oven interior, as shown below.
To remove the oven rack support for
a self-clean cycle, pull upthe support to
disengage them from the brackets. If
the rack supports are not removed, the
self-clean cycle won't start.
Oven Rack Positions
This oven is equipped with ladder rack supports with 7
positions to accomodate precisely every mode of
cooking.
Rack positions
NON-SLIDING
RACK ONLY)
Oven Vent Location
The oven is vented above each door. When
the oven is on, warm air is released through
thevents. Thisventing is necessary for proper
air circulation in the oven and good baking
results.
Oven Vent
Warm Air