Electrolux E30DF74GPS2 Use & Care Manual page 13

Surface Cooking
P CEMENT OF BURNERHEADSAND CAPS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
For the 18 000 BTU burner :
Place the burner head over the gas orifice (Figure 1). Be careful not to
damage the electrode while placing the burner head over the
orifice. Make sure electrode fits correctly into slot in burner head.
For all burners :
Place a burner cap on each burner head
(see Figure 2), matching the cap size to
the head size. The cap for each burner
has an inner locating ring which centers
the cap correctly on the burner head. Be
sure that all the burner caps and burner
heads are correctly placed BEFORE using
your appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it will
light. If the burner does not light, contact a
Service Center. Do not service the sealed
burner yourself.
Burner
Head
Figure1
P CEMENT OFBURNER G TES
BurnerCap
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Fi ure 2
.................................................... iii!_i_i!i_i_
Place grates on the Ceramic Glass Cooktop. Be sure they are right
located inside the stainless steel frame.
ATTENTION: Do not slide the grates on the stainless steel frame, doing
so can damage the surface.