Setting Surface Controls; Abouttheceramicglasscooktop; Abouttheradiant S Urface Elements - Electrolux E36EC75HSS1 Use & Care Manual

Setting Surface Controls
ABOUTTHE CE_M(C G_SS COOKTOP
[] m [] [] m [] [] [] [] [] [] [] [] m [] [] [] [] =m [] [] []
The ceramic cooktop has radiant surface elements located below the
surface of the glass. The design of the ceramic cooktop outlines the
area of the surface element underneath. Make sure the diameter of the
pan matches the diameter of the element outline on the cooktop (See
Figure).
Heat is transferred up through the surface of the cooktop to the
cookware. Only flat-bottom cookware should be used. The type and
size of cookware, the number of surface elements in use and their
settings, are all factors that will affect the amount of heat that will
spread to areas beyond the surface elements. The areas surrounding
the elements may become hot enough to cause burns.
C00ktop Appearance
C00kt0p radiant areas that heat
ABOUTTHE _B(ANT SURFACEELEMENTS
,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,,
The element temperature rises gradually and evenly. As the temperature rises, the element ; :
will glow red. To maintain the selected setting, the element will cycle on and off. The heating
element retains enough heat to provide a uniform and consistent heat during the off cycle.
For efficient cooking, turn off the element several minutes before cooking is complete. This
will allow residual heat to complete the cooking process.