Wine Rack Removam/ nstallation
To remove the wine racks for cleaning:
1
Grasp the end of the wine rack, sliding it out and up.
2
Clean wine rack with a damp rag.
To insert the wine racks:
1
2
3
Position the wine rack above the shelf channel
where
the rack is to be inserted.
(See Figure
26.)
Slide the rack on the channel
at an angle until the rack is
in the channel.
Continue
sliding until the rack is all the way into the wine
cooler.
Bulb Replacement
To replace the light bulb in your wine cooler:
1
Remove
the light housing
cover by sliding the cover
towards
the tab, swinging
the end opposite
of the tab
down and pulling down and away (see Figure
27).
2
Replace
bulb with genuine
Electrolux
replacement.
3
Replace the light housing
cover by inserting
the tab
FIRST and pushing
up the other end. You should
hear a
snap/click.