Craftsman 358.341950 Operator's Manual page 7

and seek m edical attention. Ananti-vi-
bration system d oes n ot g uarantee the
avoidance ofthese p roblems. Users
who operate power tools o nacontinual
and regular basis m ust monitor closely
their physical condition and the condition
ofthis tool.
CHAIN B RAKE: Tocomply with
Federal OSHA R egulations forCom-
mercial Logging, achain b rake i s
required and shall not b eremoved
orotherwise disabled.
SPARK ARRESTING SCREEN: Your
saw isequipped with atemperature
limiting muffler and spark arresting
screen which m eets the requirements
ofCalifornia Codes 4442 a nd 4443.
AllU.S. forest land and the states o f
California, Idaho, Maine, Minnesota,
New Jersey, Oregon, and Washington
require bylaw that m any i nternal com-
bustion engines tobeequipped with a
spark arresting screen. Ifyou operate
achain s aw inastate o rlocale w here
such regulations exist, you arelegally
responsible formaintaining the operat-
ing condition ofthese p arts. Failure to
dosoisaviolation ofthelaw. Refer to
theCustomer Responsibilities chart in
theMAINTENANCE section.
STANDARDS: This chain s aw islisted
byUnderwriters Laboratories, Inc. i n
accordance with American National
Standards forGasoline-Powered Chain
Saws Safety Requirements (ANSI
B175.1-2000).
_WARNING:Before using c hain
saw, ensure all f asteners are secure.
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model 358,341950
• Chain saw (fully assembled)
• Chain adjustment tool (bar tool)
• 2-cycle engine oil
• Carrying case
• Extra 14 in. bar
• Extra 14 in. chain
Examine parts for damage. Do not use
damaged parts.
If you need assistance or find that parts
are missing or damaged, please call
1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
KNOW YOUR CHAIN SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence.
Chain
Adjustment Tool
(Bar Tool)
Front Hand Guard
Front Handle
J
Starter Rope
ON/STOP
Switch
________ Choke/
Fast Idle
Chain Muffler Lever
!
Bar Bar Oil Fill Cap _ I
Sprocket /
Hole Starter Housing
7
Fuel Mix Fill Cap
\
Primer Bulb