Advertisement
Bevel Cut
A cutting operation made with the table at any angle
other than 90" to the blade.
Crosscut
A cutting or shaping operation made across the grain
of the workpiece.
Compound Cut
A compound cut is a cut made using a miter angle
and a bevel angle at the same time.
Freehand (for scroll saw)
Performing a cut without using a fixture to assure a
straight cut (normally a curved or irregular shape).
Gum
A sticky, sap based residue from wood products.
Kerr
The material removed by the blade in a through cut or
the slot produced by the blade in a nonthrough or
partial cut.
Leading End
The end of the workplace pushed into the cutting tool
first.
Nonferrous Metal
Metal that does not contain iron; such as aluminum,
brass, and copper.
Push Stick
A device used to feed the workplace through the saw
blade during narrow ripping type operations and helps
keep the operator's hands well away from the blade.
Reeln
A sticky, sap base substance that has hardened.
Ripping
A cutting operation along the length of the workpiece.
Saw Blade Path
The area directly in line -- over, under, behind, or in
front of the blade. As it applies to the workpiece, that
area which will be, or has been, cut by the blade.
Set
The distance that the tip of the saw blade tooth is bent
(or set) outward from the face of the blade.
SPM
Strokes per minute. Used in reference to blade
movement.
Throw-Back
Throwing of a workpiece in a manner similar to a
kickback, usually associated with a cause other than
the kerf closing, being dropped into the blade, or
being placed inadvertently in contact with the blade.
Through Sawing
Any cutting operation where the blade extends
completely through the thickness of the workpiece.
Workplece
The item on which the cutting operation is being done.
The surfaces of a workpiece are commonly referred to
as faces, ends, and edges.
Worktable
The surface on which the workpiece rests while
performing a cutting or sanding operation.
Throat
Motor
Ddve
Blade Length
24 in.
Table Size
20-1/2 in. x 11 in.
120 V, 1.4 amp 60 HZ-AC only
Table "nit
0 ° - 47" right
2 Speed
Overall Dimensions
14 in. W
1725 Strokes per minute
29-1/2 in. L
825 Strokes per minute
15 in. H
5 in. plain or pin
Net Weight
87 lb.
Advertisement
