Dyson Airblade Owner's Manual page 10

Connecting to the
Electrical Supply cont.
Step 3.
Terminal block connections:
] 20 volt unit:
Secure the Line, Neutral and
Ground wires into the proper
terminal block locations.
Hanging unit
Hang the unit on the secured
mounting bracket as illustrated
in Fig 10
Secure the unit through the 4 holes
in the lower section of the unit,
illustrated in Fig 11
Refitting Fascia &
Access Panels
Attach the front fascia panel back
on by latching the top lip onto
the middle fascia first and then
pivoting the fascia cover
downward until flush.
Install the bottom left and right
tamper proof screws back into the
machine using the supplied tool.
Install the (2) tamper proof screws
back into the inner section of the
fascia panel.
Re-install the Access panel and
tamper proof screw.
Recommended minimum anchor
size of 0.25"
120v MODEL
[J_'l]J]
/
............................... ,>/'
//'
/
/{'
L@N
t t