Dyson airblade tap Cleaning Manual

Keep it clean
The Dyson Airblade Tap hand dryer should be cleaned daily.
Follow these 3 simple steps to ensure the machine performs
to its best and remains hygienic.
1
Wipe sensors using a soft
cloth and non-abrasive
cleaner then place
cleaning cap over sensors
to prevent activation.
Important information
Most professional cleaning chemicals
can be used. The following are some
that are harmful to the machine.
DO NOT USE:
Alcohol-acid mixes
Alcohol
Solvent /oil-based mixes
Quaternary ammonium
Alkali-bleach mixes
Foaming ingredients
Bleach or abrasive cleaners
Using the wrong cleaning method or
product may invalidate the warranty.
All cleaning chemicals should be used
exactly as indicated by the manufacturer's
instructions (including appropriate dilution).
2
Clean all tap surfaces,
sink, mirror and any walls or
counter tops. When complete
REMEMBER to remove
cleaning cap.
Any chemicals intended for use should
first be tested on an inconspicuous area
to confirm suitability. Aside from cleaning
chemicals, care should be taken to avoid
any harmful fluids from coming into contact
with the product, in particular oils and
alcohol-based products.
Do not pressure wash the machine.
Water supply cleanliness
and biological growth
In some countries there are regulations
or guidelines that require temperature
controlled water supply systems (such as
that supplied to the Dyson Airblade Tap
hand dryer) to be subjected to regular
cleaning to minimise any biological growth.
To enable you to meet these regulations,
the Dyson Airblade Tap hand dryer has
been designed and tested to withstand
internal cleaning both with hot water up
to 95°C and with sodium hypochlorite
at a concentration of 0.45%.
3
REGULARLY clean air inlets
on base of motor bucket
(under sink). Ensure plughole
in sink is free from blockages
so water can drain freely.
When carrying out internal cleaning of the
Dyson Airblade Tap hand dryer, please be
aware of any safety considerations when
using hot water or chemicals. Dyson will
not be responsible for any injury caused
by this process.
Dyson is unable to advise regarding the details
of the cleaning you should carry out because
this will be specific both to the applicable
regulations and to your water supply system.
Contact us for more information:
0800 345 7788
info@dysonairblade.co.uk
www.dysonairblade.co.uk
JN: 70759 17.11.14