Support Assembly - Craftsman 917.249662 Owner's Manual

1
1,
2,
BAGGER SUPPORT ASSEMBLY
(See Fig. 1A, 1B & lC)
DRAWBAR
Remove and discard the upper bolt on both sides of
the drawbar. Using the same holes, install the shoulder
bolts supplied and tighten securely.
REMOVE AND DISCARD
UPPER BOLTS AND INSTALL
SHOULDER BOLTS SUPPLIED
FIG. 1A
DRAWBAR
Install adapter to both sides of support assembly as
shown,
!,
ADAPTER
FIG. 1B
3, Align support assembly pin with hole in drawbar and
hang assembly over the shoulder bolts,
4, Be sure support assembly is seated properly and secure
with retainer spring supplied,
SHOULDER
BOLTS
ASSEMBLY
PIN
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY
(See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor,
1, Position cover assembly on ground behind tractor,
2, Lift and rotate coverto align cover brackets with support
assembly tubes,
3, Slide cover assembly down onto the support tubes,
COVER
ASSEMBLY
SUPPORT
ASSEMBLY
FIG. 2
5