Download Print this page

How To Charge; The Battery Pack - Craftsman Nextec 320.61326 Operator's Manual

12.0-volt lithium-ion cordless sander
Hide thumbs

Advertisement

FuelGauge
This tool is equipped with a FuelGauge which indicates the battery pack charge level.
The green LED on the FuelGauge
indicates
that the battery
is fully charged.
The orange LED on the FuelGauge
indicates
that the battery has used
approximately
one half of its charge.
The red LED on the FuelGauge
indicates
the battery
pack is depleted
and needs
to be charged.
HOW TO CHARGE
THE BATTERY
PACK
NOTE: This Lithium-Ion
battery
pack is shipped
partially
charged.
Before using it
the first time, fully charge the battery
pack.
A fully discharged
battery
pack will charge in about 30 minutes
in a surrounding
temperature
between
32°F (0°C) and 104°F (40°C).
1.
Charge the Lithium-Ion
battery
pack with the correct
charger.
2.
Connect the charger to a power supply.
3.
Align the raised ribs of the battery pack with the slot in the charger.
4.
Insert the battery pack into
Fig. 2
the charger (Fig. 2).
5.
The charger will
communicate
with the
|
battery pack to evaluate the
condition of the battery pack.
6.
The green light will flash
while the battery pack is
charging.
After charging
is complete,
the green
LED on the charger will
be on. The flickering
red
light indicates
a defective
battery or a bad connection
between
the battery and
the charger.
7.
The battery pack will fully charge if left on the charger, but it will not overcharge.
NOTE: For your convenience,
the charger can operate with most generators
and
inverters rated at 300 watts or higher.
61326
Manual_Revised_10
0226
Page 12

Hide quick links:

Advertisement

loading

  Related Manuals for Craftsman Nextec 320.61326