Craftsman 536.270340 Operator's Manual page 17

OPERATION
HOW TO INSTALL THE SIDE DISCHARGE ATTACHMENT
,_ WARNING: To prevent the engine from starting, dis-
connect the wire from the spark plug. Make sure the
attachment clutch is in the DISENGAGE position.
The mulcher cover lets you mulch the grass for a clean, fine cut.
To discharge the grass out the side, install the side discharge
attachment as follows.
1. Remove the fasteners that secure the mulcher cover (see
Figure 15).
2. Lift the mulcher cover. Mount the side discharge attachment
onto the same bolts that secured the mulcher cover.
3. Secure the side discharge attachment with the fasteners.
4. To mulch, remove the side discharge attachment and mount
the mulcher cover to the mower housing with the fasteners.
Mulcher Cover
Wingnut
Washer
Side Discharge Attachment
Washer
Wingnut
Figure 15
13533 17