How To Assemble - Craftsman 536.249810 Operator's Manual

ASSEMBLY
HOW TO ASSEMBLE THE GRASS BAG
The hardware to assemble the grass bag is shown full size below.
(A)
30x20
(B) (C)
lx94 15x89
1.
2.
Slide the bottom tube onto the wire frame (see Figure 1).
Align holes in bottom tube with holes in wire frame and
secure with cotter pins (A). Make sure to bend BOTH legs of
the cotter pins (A) apart.
3.
Wire Frame
Wire Frame
\
Bottom
(A)
Bottom
Tube
Figure !
First, put the cut-out, located on the right side of the grass
bag, around the handle support (see Figure 2).
4. Then, slide the grass bag over the wire frame.
Cut-Out
Grass
Bag
Handle
Support
Wire Frame
Figure 2
5. Attach the clips to the wire frame (see Figure 3).
Clips
Wire Frame
Figure 3
Mount the handle on the handle support and secure with
bolt (B} and nut (C) (see Figure 4).
7. Mount the grip onto the handle.
Grip
Handle
(c)
(B)
Handle
Support
Figure 4
F-020902L 7