Lenovo ThinkPad X121e User Manual page 40

Note: If you want to use Fn+F5 to enable or disable the wireless features, the following device drivers
must be installed on your computer beforehand:
– Power Management driver
– OnScreen Display Utility
– Wireless device drivers
For information on the wireless features, refer to "Wireless connections" on page 35.
Launching the camera and audio settings
• Fn+F6
If you press Fn+F6, the camera and audio settings window is opened and the camera preview is turned
on. From this window, you can change the camera and audio settings.
Note: The Camera settings area only appears if your computer has an integrated camera. For more
information, see "Using the integrated camera" on page 46.
Applying a presentation scheme
• Fn+F7
Apply a presentation scheme directly, with no need to start Presentation Director.
To disable this function and use the Fn+F7 key combination for switching a display output location, start
Presentation Director, and change the settings.
Click Start ➙ All Programs ➙ ThinkVantage ➙ Presentation Director.
For information on applying a presentation scheme, refer to "Presentation Director" on page 19.
Note: If your computer is a Windows 7 model, it does not support presentation schemes, however the
Fn+F7 key combination may still be used to switch display output location.
Switching a display output location
• Fn+F7
For Windows 7:
Switch between the computer display and an external monitor. Windows will show these display options:
– Computer display only (LCD)
– Computer display and external monitor (same image)
– Computer display and external monitor (extended desktop function)
– External monitor only
Note: To switch between the computer display and an external monitor, the Win+P key combination
is also available.
For Windows XP:
Switch between the computer display and an external monitor. If an external monitor is attached,
computer output is displayed in the following three patterns by turns:
– External monitor (CRT display)
– Computer display and external monitor (LCD + CRT display)
– Computer display
Notes:
– This function is not supported if different desktop images are displayed on the computer display and
the external monitor (the Extend desktop function).
24
User Guide