Then remove these FRUs in order:
•
"1010 Hard disk drive and solid state drive" on page 59
•
"1020 Keyboard" on page 61
Note: In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint
reader has any defects, you can replace it by following the procedures given in this section, which are the
same for a palm rest with or without a fingerprint reader.
Removal steps of keyboard bezel with fingerprint reader
Step
Screw (quantity)
1
M2 x 5 mm (7)
2
M2 x 3 mm (3)
Step
Screw (quantity)
3
M2 x 3 mm (2)
72
Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
Black
0.181 Nm
(1.85 kgfcm)
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)