1010 Hard Disk Drive And Solid State Drive - Lenovo ThinkPad X1 Hardware Maintenance Manual

Hardware maintenance manual
Hide thumbs Also See for ThinkPad X1:
Table of Contents

Advertisement

4. Select Disable Built-in Battery.
5. Follow the instructions on the screen.
Then the battery pack is disabled in the UEFI BIOS. When ac power is reconnected, the battery pack
will be automatically enabled.

1010 Hard disk drive and solid state drive

For access, disable the battery pack first. Refer to "1000 Disabling the battery pack in the UEFI BIOS" on
page 58 for detailed instructions.
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to
physical shock. Improper handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Removal steps of hard disk drive and solid state drive
Note: Loosen the screw
Step
Screw (quantity)
1
M2 x 8 mm (1)
1
, but do not remove it.
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad x1 hybrid

Table of Contents