When installing:
Make sure that the hard disk drive rubber rails or solid state drive spacers are attached firmly.
1020 Keyboard
For access, disable the battery pack first. Refer to "1000 Disabling the battery pack in the UEFI BIOS" on
page 58 for detailed instructions.
Removal steps of keyboard
Step
Screw (quantity)
1
M2 x 5 mm (2)
Slightly press the keyboard and slide it a little bit forward, in the direction shown by the arrow
front edge of the keyboard from the frame. Then, lift up the keyboard in the direction shown by the arrow
Lift the keyboard in the direction shown by the arrow
Color
Black
4
, and then detach the connectors.
.
Chapter 8
Removing and replacing a FRU
Torque
0.181 Nm
(1.85 kgfcm)
2
, to detach the
3
61
.