Creating Recovery Media; Using Recovery Media; Performing Backup And Recovery Operations; Performing A Backup Operation - Lenovo ThinkPad X1 User Manual

Creating recovery media

This section provides instructions on how to create recovery media on the Windows 7 operating system.
Note: On the Windows 7 operating system, you can create recovery media using discs or external USB
storage devices by doing as follow:
• Click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Factory Recovery Disks. Then, follow
the instructions on the screen.

Using recovery media

This section provides instructions on how to use recovery media on different operating systems.
• On the Windows 7 operating system operating system, you can use recovery media to restore the
computer to the factory default settings only. You can use recovery media to put the computer in an
operational state after all other methods of recovery have failed.
Attention: When you use recovery media to restore the computer to the factory default settings, all the
files currently on the hard disk drive will be deleted and replaced by the factory default settings.
To use recovery media on the Windows 7 operating system, do the following:
1. Connect the boot medium (memory key or other USB storage device) to the computer.
2. Repeatedly press and release the F12 key when turning on the computer. When the Startup Device
Menu opens, release the F12 key.
3. Select the desired startup device and press Enter. The restore process begins.
4. Follow the instructions on the screen to complete the operation.
Notes:
1. After restoring your computer to the factory default settings, you might have to reinstall device drivers
for some devices. See "Reinstalling preinstalled applications and device drivers" on page 73.
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recover
or reinstall your Microsoft Office or Microsoft Works applications, you must use the Microsoft Office
CD or Microsoft Works CD. These discs are provided only with computers preinstalled with Microsoft
Office or Microsoft Works.

Performing backup and recovery operations

The Rescue and Recovery program enables you to back up all your hard disk drive contents including the
operating system, data files, software programs, and personal settings. You can designate where the
Rescue and Recovery program stores the backup:
• In a protected area of your hard disk drive
• On the secondary hard disk drive if a secondary hard disk drive is installed in your computer
• On an attached external USB hard disk drive
• On a network drive
After you have backed up the contents on the hard disk drive, you can restore the complete contents of the
hard disk drive, restore only the selected files, or restore only the Windows operating system and applications.

Performing a backup operation

This section provides instructions on how to perform a backup operation using the Rescue and Recovery
program on different operating systems.
70
User Guide