Using The Touch Pad - Lenovo ThinkPad X1 User Manual

2. To select and drag as required by your software, press the left or right click button with either thumb
and move the TrackPoint pointing stick.
By enabling Press-to-Select, you can make the TrackPoint pointing stick function the same as the
left or right click button.
Customizing the TrackPoint
You can customize the TrackPoint pointing device and its buttons as follows:
• Switch the functions of the left and right buttons.
• Change the sensitivity of the TrackPoint.
• Enable the Press-to-Select function.
• Enable the Magnifying Glass.
• Enable the TrackPoint scrolling function.
• Enable the TrackPoint Scrolling Tips.
To customize the TrackPoint, do as follows:
1. Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse ➙ UltraNav. A panel for UltraNav
Device Settings pops up.
2. Click Manage Settings to open the Mouse properties window.
3. Click the UltraNav tab. Under TrackPoint, proceed to changing the settings.
For details, refer to the Help in the Utility.
Changing the cap
1
The cap on the end of the TrackPoint pointing stick is removable. You can replace it as shown in
the drawing.
Note: If you replace the keyboard, a new keyboard is shipped with the default cap. If you wish, you can
keep the cap from your old keyboard and use it on the new one.

Using the touch pad

The touch pad is a pad
2 on the screen, slide your fingertip over the pad in the direction in which you want the pointer to move.
32
User Guide
1 below the TrackPoint buttons at the bottom of the keyboard. To move the pointer