Installing Intel Chipset Support For Windows 2000/Xp/Vista/7; Installing Other Device Drivers; Thinkpad Setup - Lenovo ThinkPad X1 User Manual

9. Select Browse my computer for driver software, and then click Let me pick from a list of device
drivers on my computer.
10. Click Have Disk.
11. Specify the path where the monitor INF file is saved, then click Open.
12. Click OK.
13. Confirm the correct display type, then click Next.
14. Windows has finished installing. Click Close.
15. Click Close for Display Properties.
16. Click OK in the Monitor tab.
17. Click OK and close the Display Settings window.

Installing Intel Chipset Support for Windows 2000/XP/Vista/7

The Intel Chipset Support for Windows 2000/XP/Vista/7 is located in the C:\SWTOOLS\DRIVERS\INTELINF
directory. To install it, go to the directory and run infinst_autol.exe.

Installing other device drivers

The other device drivers are provided in the C:\SWTOOLS\DRIVERS directory on your hard disk drive.
You will also need to install application software, which is provided in the C:\SWTOOLS\APPS directory
on your hard disk drive. To do this, refer to the instructions in "Reinstalling preinstalled applications and
device drivers" on page 73.
Note: If you cannot find the Supplement files, device drivers, and application software you need on your
hard disk drive, or if you want to receive updates and the latest information about them, go to:
http://www.lenovo.com/ThinkPadDrivers

ThinkPad Setup

Your computer provides a program, called ThinkPad Setup, that enables you to select various setup
parameters.
To start ThinkPad Setup, do as follows:
1. To protect yourself against accidental loss of data, back up your computer registry. See "Performing
backup and recovery operations" on page 70.
2. If the diskette drive is connected to the computer, remove any diskette from the diskette drive, and
then turn off the computer.
3. Turn on the computer. When the logo screen is displayed, press the F1 key. The ThinkPad Setup opens.
If you have set a supervisor password, the ThinkPad Setup menu appears after you enter the password.
You can start the ThinkPad Setup by pressing Enter instead of entering the supervisor password.
However, you cannot change the parameters that are protected by the supervisor password. For more
information, refer to "Using passwords" on page 55.
An example of the ThinkPad Setup menu is shown as below:
102
User Guide