Advertisement
Error Messages (cont.)
REMOVE THE PAPER
nnn:FINISHER STACKER FULL
One of the stacker trays in the finisher is
full:
• nnn = 481 Top (face up) Stacker Tray
• nnn = 482 Main (face down) Stacker
Tray
What to Do
Remove the stack of printed sheets from
the appropriate finisher tray.
REMOVE THE PAPER
nnn:TRAYX UNSUITABLE SIZE
The paper in Tray X is not a size that can
be fed through the tray.
What to Do
Replace the paper in the tray with an
appropriate size.
FUSER MISSING
Appears on the second line of the display
to indicate that the fuser is not properly
installed.
What to Do
1. Open the top cover
2. Press down on the fuser to be sure it is
firmly in place.
49
Note
: If the message still appears, push
the blue release latches at either
end of the fuser (between the
fuser and the sides of the printer)
toward the open cover and lift the
fuser out. Then lower it back into
the printer pushing down firmly.
You should feel the latches at
either end engage.
3. Close the cover.
Advertisement
