Removal and replacement procedures
Bluetooth module
✎
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
available using spare part number 579161-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Slide the Bluetooth module out of the holder 2.
3. Remove the module from the computer 3.
Reverse this procedure to install the Bluetooth module.
4–24
"Battery" on page
4-7).
"Switch cover and keyboard" on page
Spare part number
537921-001
4-20).
Maintenance and Service Guide