Item
PRINT ID CHECK PATTERN
Item
SHUTDOWN START
.
Item
COPIES
DUPLEX
BINDING
PAPER FEED
AUTO TRAY
SWITCH
TRAY
SEQUENCE
Test Print Menu
Value
Execute
Shutdown Menu
Value
Execute
Print Menu
The default settings are
Value
1 to 999
On; Off
Long edge; Short
edge
Tray 1; Tray 2; Tray
3; MP Tray
On; Off
Down; Up; Paper
feed tray
C7100/C7300/C7500 Setting up • 45
Description
Prints ID check pattern to detect bad
ID.
Displayed only if "TEST PRINT
MENU" of the System Maintenance
Menu is set to ENABLE.
Description
Printer shut down sequence which
prevents loss of data from the hard
disk drive. Appears only when the
hard disk drive is installed.
bold
face.
Description
Sets the number of copies.
Specifies two-sided (duplex) printing
if the optional duplex unit is installed.
Sets binding for duplex printing. Only
displayed if duplex is ON.
Selects source of paper feed. Tray 2
and 3 only displayed if installed.
Automatic switching to next tray
when tray in use empties.
Specifies selection order priority for
switching Auto Tray Select/Auto Tray
Switch.