Installation Roadmap; Installing And Configuring The Disk Array - HP XP20000/XP24000 Configuration Manual

Figure 1 SNMP configuration
.

Installation roadmap

Perform these actions to install and configure the disk array:
1.

Installing and configuring the disk array

Defining the paths
Setting the host mode and host group mode for the disk array ports
Setting the system option modes
Configuring the Fibre Channel ports
2. Installing and configuring the host
Loading the operating system and software
Installing and configuring the FCAs
Configuring NetWare Client
Configuring NetWare ConsoleOne
Fabric zoning and LUN security
Fabric zoning and LUN security for multiple operating systems
3. Connecting the disk array
Verifying new device recognition
4. Configuring disk devices
Creating the disk partitions
Assigning the new devices to volumes
Mounting the new volumes
Verifying client operations
Installing and configuring the disk array
The HP service representative performs these tasks:
Assembling hardware and installing software
Loading the microcode updates
Installing and formatting devices
After these tasks are finished, use XP Remote Web Console, P9000 or XP Command View Advanced
Edition Software, or XP Array Manager to complete the remaining disk array configuration tasks. If
you do not have these programs, your HP service representative can perform these tasks for you.
XP Disk Array Configuration Guide: Novell NetWare 9