HP XP1024 System Configuration Manual page 29

Disk array xp operating system configuration guide: sun solaris
Hide thumbs Also See for XP1024:
Table of Contents

Advertisement

9.
Enter the disk type parameters for the selected device using the Device Geometry
tables in Appendix A. See the following example.
Example
# format> type
Enter type.
:
AVAILABLE DRIVE TYPES
0. Auto configure
14. SUN2.1G
15. HITACHI-OPEN-3-0315 Do not select this disk type.
16. other
Specify disk type (enter its number):16 Enter number for "other"
Enter number of data cylinders:3336 Enter value from Appendix A
Enter number of alternate cylinders[2]:2
Enter value from Appendix A
Enter number of physical cylinders[3338]: Press Enter for default
Enter number of heads:15 Enter value from Appendix A
Enter number of physical sectors/track[defaults]:
Press Enter for default
Enter rpm of drive [3600]:10000 Enter value from Appendix A
Enter format time[defaults]: Press Enter for default
Enter cylinder skew[defaults]: Press Enter for default
Enter track skew[defaults]: Press Enter for default
Enter track per zone[defaults]: Press Enter for default
Enter alternate tracks[defaults]: Press Enter for default
Enter cache control[defaults]: Press Enter for default
Enter prefetch threshold[defaults]: Press Enter for default
Enter minimum prefetch[defaults]: Press Enter for default
Enter maximum prefetch[defaults]: Press Enter for default
Enter disk type name:"HITACHI OPEN-3"
Enter device type from Appendix A
selecting c1t2d0
[disk formatted]
No defined partition tables.
Disk not labeled.
format>
If you do not want to partition and label the disk, this is the end of the procedure.
(You don't need to partition or label if you use Veritas Volume Manager.) If you
do want to partition the disk, when you are asked whether you want to label the
disk, enter n for "no."
10.
After the format menu is displayed, enter partition.
11.
Enter the desired partition number and partition parameters.
12.
Enter print at the partition> prompt to display the partition table.
13.
When you are finished setting the partitions for the selected device, enter label at
the partition> prompt, and then enter y to label the device.
:
Label it now ? n Enter "n" for no.
Disk Array XP operating system configuration guide: Sun Solaris
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp12000Xp10000Xp128

Table of Contents