Verifying The Hba Configuration - HP XP1024 System Configuration Manual

Verifying the HBA configuration
After installing the HBAs, verify recognition of the HBAs and drivers as follows:
1. Log into the system as root. Verify that all devices are powered on and properly
connected to the system.
2.
Use the prtdiag command (/usr/platform/sun4u/sbin/prtdiag) to verify that the
HBA is installed properly. By using the prtconf command and/or by browsing the
/var/ad/messages file, you can check whether the HBA driver has attached. Look
for the WWN/WWPN of the HBA in the /var/adm/messages file or by using an
HBA-specific tool or command.
Disk Array XP operating system configuration guide: Sun Solaris
23