HP XP P9500 Operation Manual page 37

Hp storageworks p9000 mainframe host attachment and operations guide: p9500 disk array (av400-96332, january 2011)

Hide thumbs Also See for XP P9500:

Table of Contents

Create as many logical volumes as you need using the following command: lvcreate

--size 16G fcpvg

Enable the alternate paths to the physical volumes using the pvpath command: pvpath

--path0 --enable y /dev/sda1 pvpath --path1 --enable y /dev/sda1.

If both paths are set to a weight of 0, they will load balance.

These configurations yield the SCSI device /dev/sda - /dev/sdc, This device is accessible

on the first path and the SCSI device /dev/sdd - /dev/sdf accessed on the second path.

Attaching FCP adapters to zSeries hosts running Linux

Table of Contents

Storageworks p9000 P9500