Attaching Scsi Cables And Configuring The Disk Enclosure Switches - HP Surestore Disk Array 12h - And FC60 User Manual
Disk array fc60 user's guide (a5277a)
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- Advanced user's manual (466 pages) ,
- System administrator manual (279 pages)
Table of Contents
Advertisement
Attaching SCSI Cables and
Configuring the Disk Enclosure Switches
NOTE! It is critical that all SCSI cables be tightened securely. Use the
following steps to ensure the cable connectors are seated properly.
1. Connect the cable to the enclosure connector and tighten the
mounting screws finger tight.
2. Push on the connector and retighten the mounting screws. Repeat
once more.
3. Use a flat blade screwdriver to tighten the screw 1/4 turn. Be sure the
screw is not cross-threaded.
98
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Surestore Disk Array 12h - And FC60 and is the answer not in the manual?