HP Surestore Disk Array 12h - And FC60 User Manual page 227

Problem HW Event
Description Category
Power Supply Critical
LED is amber
Temperature is Critical
over limit
Major
Warning
Temperature is Critical
under limit
Major
Warning
Voltage is over Critical
limit
Major
Warning
Voltage is under Critical
limit
Major
Warning
LED State Status
Amber Critical
none Critical
Temp is
>54.5º C
none Non-critical
Temp is
>36º C
none Critical
Temp is
<9.5º C
none Non-critical
Temp is
<15.5º C
none Critical
none Non-critical
none Critical
none Non-critical
Probable Cause/Solution
– An incompatible or defective
component caused a temporary
fault.
– Power supply hardware is faulty.
Unplug the power cord and wait for
the LED to turn off. Reinsert the
power cord. If fault persists, replace
the power supply.
– A fan is faulty. Check status and
correct.
– Airflow is obstructed; vents are
blocked.
– One or more slots are empty.
– Power supply is faulty. Check
status and correct.
– Room temperature is too high. If
ambient temperature cannot be
reduced in a reasonable time,
turn OFF product to prevent
shortened life.
– Temperature sensor is faulty.
Compare temperature reported
by peer BCC.
– Room temperature is too low.
– Temperature sensor is faulty.
Compare temperature reported
by peer BCC.
Power supply is faulty. Check status
and correct.
Either power supply is faulty. Check
status and correct.
227