Profiles; Classes - HP Surestore 6164 - Switch User Manual

Profiles

Classes

Using Fabric Watch
The configuration file can be uploaded and downloaded through either
Web Tools (the Config Admin tab in the Switch Admin window), or the
Telnet commands
configUpload
downloading the file back to the switch, you must either reboot the switch
or use the Telnet command
file.
Fabric Watch includes a complete set of threshold and alarm configuration
defaults. In addition, a Fabric Watch profile specific to your environment
can be downloaded to the switch to customize the configuration. Each
profile is for a different purpose, and contains only the configuration
information that is different from the default configuration. The default
information is always preserved. After loading the profile, you can specify
whether the default or the profile information is used.
A profile can contain the following information:
• Threshold values
Unit string, time base, lower boundary, upper boundary, and buffer size
• Alarm values
Change, exceed, below, above, in-between, and behavior type
Fabric and switch elements are organized into classes, which are groupings
of closely related elements. There are six major classes
• Fabric
Monitors key fabric resources, such as fabric reconfiguration, zoning
changes, and new fabric logins
• Environmental
Monitors switch environment functions, such as temperature, power
supply, and fan status
and
configDownload
to reload the configuration
fwConfigReload
. After
17